USING THE KNOB
AND THE TOUCH SENSOR
Turn the knob right: Volume Up
Turn the knob left: Volume Down
Touch sensor:
the small silver metal hemisphere on the left side of the
front plate. In order to reach certain functions you will need to combine
short (•) and long (
–
) touches.
Here you can find the combinations:
• next input (after last input comes input 1 again)
–
mute / un-mute
•
–
night mode activation/deactivation. After activation a dim dash will be
displayed in night mode. Deactivate the night mode with one short and
one long touch again on the sensor
•
•
sleep mode / wake up from sleep state
Personalisation possibilities:
• • • You can choose between two display brightness. They alternate with
every 3 clicks between the brighter and dimmer state
• •
–
switch between ‘L’ - low sensitivity and ‘H’ - high sensitivity of the
optical encoder. In high sensitivity mode adjust volume carefully and
do
not spin the volume control knob.
Important note:
If you bought your icOn 4PRO with the optional AV pass-through function
enabled for a particular input, on the output the input signal will appear
without attenuation (full volume, 0 dB) and you will see 0 (dB) on the
display.
In AV pass-through state every function (volume adjustment,
mute, balance) is disabled , only input change is possible to finish the AV
pass-through mode and listening normally from the other inputs. Please
be careful with the AV pass function, because using it in a wrong way you
can destroy your loudspeakers. If you don’t understand fully how does it
work - do not enable this function.
