LED T5 – INSTALLATION INSTRUCTIONS
LIFEBULB | BYPASS T5
LED T5 – INSTALLATION INSTRUCTIONS
Products covered by this instruction guide
1
:
•
LED F28T5HE
•
LED F54T5HO
IMPORTANT SAFETY INSTRUCTIONS
DANGER – RISK OF SHOCK-DISCONNECT POWER BEFORE INSTALLATION
The retrofit kit includes one (1) LED tube, one (1) installation instruction, and one (1) field-applied label.
The products are intended to be used in dry and damp locations only.
The T5 LED tubes are intended to retrofit surface mount, Type IC or non-IC recessed mount Listed fluorescent
luminaires that used maximum 6-straight tubular lamps with or without a diffuser, the minimum dimensions
of luminaires are tabulated below:
ELECTRICAL RATINGS:
Model Number
Input Ratings
Nominal
Length (FT)
Voltage (V)
Frequency (Hz)
Current (mA)
Wattage (W)
LBP5F13xxA
120-277V
50/60Hz
115mA
13W
4FT
LBP5F23xxA1
120-277V
50/60Hz
205mA
23W
4FT
LBP5F25xxA1
120-277V
50/60Hz
215mA
25W
4FT
Model Number
Minimum Lamp Compartment Dimensions
Lamp Compartment of
Luminaire (L x W x H)
Maximum Lamps in
Luminaire
Lamp Holder-to-Lamp
Holder Spacing (in)
LBP5F13xxA
2.1 x 1.5 x 0.3
6
1.38in
LBP5F23xxA1
3.1 x 1.5 x 0.3
6
1.38in
LBP5F25xxA1
4.0 x 1.5 x 0.3
6
1.38in
THIS PRODUCT MUST BE INSTALLED IN ACORDANCE WITH THE APPLICABLE INSTALLTION CODE BY A PERSON
FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
WARNING – Risk of fire or electric shock. The electrical rating of these products are 120-277Vac or 277Vac as
“ELECTRICAL RATINGS” table above, the installer must determine whether they have 120-277Vac or 277Vac at
the luminaire before installation.
WARNING – Risk of fire or electric shock. LED Retrofit Kit installation requires knowledge of luminaires electrical
systems. If not qualified, do not attempt installation. Contact a qualified electrician.
1
NOTE: Specifications are subject to change without notice.
