In the main interface press and to switch
to
“
HUM
”
interface.
It displays the relative humidity at which the smart purifying
fresh air unit main unit is located.
In the main interface press and to switch
to
“
CO
2
”
interface.
CO
2
concentration will display on the monitoring controller,
≤
1000ppm is good.
It takes about 40 seconds for the value to stabilize.
The average CO
2
concentration in outdoor air is about 400ppm.
In the main interface press and to switch
to
“
PM2.5
”
interface.
The American standard requires PM2.5 level to be below 12
μ
g/m
3
.
And the EU standard requires PM2.5 level to be below 25
μ
g/m
3
.
It takes about 40 seconds for the value to stabilize.
10
9
Outlet temperature measurement
The Monitoring Controller Testing Items
The Monitoring Controller Testing Items
PM2.5 measurement
CO
2
measurement
Humidity measurement
Note: To enable this function, please ensure the monitoring
controller is connected with LIFAair smart purifying
fresh air unit main unit.
1. Control the main unit: Press to enter speed mode selection interface (paired with the main unit),
press to move selection box and press to select different purification mode.
Unit Off: Power on/off smart purifying fresh air unit.
Smart Mode: According to real-time indoor air quality,
the monitor will auto-adjust the main
unit’s fan speed (recommended mode).
Manual Mode: Manually adjust the fan speed of the main
unit; the fan speed will be held at set
value.
Night Mode: Fan will run at ultra-low noise level, to
ensure a comfortable sleeping
environment (Fan speed will remain at
constant speed).
Turbo Mode: Maximum fan speed, rapid purification.
How to Operate the Monitoring Controller
To enable full autonomous operation, please ensure the monitoring
controller is connected to the main unit.
English
English
Outdoor temperature measurement
In the main interface press and to switch
to
“
Outlet Temp
”
interface.
It displays the outlet temperature (temperature generated after
the outdoor airflow completing heat exchange with the indoor
airflow via heat exchanger) at which the smart purifying fresh
air unit main unit is located.
Note: To enable this function, please ensure the monitoring
controller is connected with LIFAair smart purifying fresh air unit main unit.
In the main interface press and to switch
to
“
Outdoor Temp
”
interface.
It displays the outdoor temperature at which the smart
purifying fresh air unit main unit is located.
Note: To enable this function, please ensure the monitoring
controller is connected with LIFAair smart purifying
fresh air unit main unit.
1.
In
"
SMART
In
$0
2
"
SMART
HUM
In
"
SMART
Outlet
Temp
In
"
SMART
Outdoor
Temp
In
"
SMART
Unit
Off
Manual
Smart
Night
Manual
Smart
Turbo
Night
