1.
7
Monitoring Controller Pairing with the Main Unit
8
1.
CN
No
Yes
Purifier Pairing
Purifier Pairing
Paired
CN
3. Press and hold on the controller, touch to
select purifier pairing, then click to confirm.
Monitoring Controller Pairing with the Main Unit
Pairing
Monitoring controller works collaboratively with the main unit through a special Bluetooth wireless connection, can be paired with LIFAair smart air
purifiers within certain distance.
2. Slide anticlockwise on the touch circle of purifier main unit to let the main unit
blink green slowly, with one finger press and hold icon on the touch
circle for over 5 seconds until the green light flashes rapidly. The main unit will
then enter pairing mode for 30 seconds.
Note: When pairing, the main unit must be in standby mode (green light slowly
flashing; when the main unit flashes white, it has been successfully paired
with the controller).
1. Press and hold the monitoring controller ON/OFF button to
turn it on.
5. After the pairing is successful, the main unit indicator light
will turn white, and the monitor will display Paired .
The icon will appear at the top of the secondary
display. If pairing is unsuccessful, please repeat the above
steps.
Monitoring Controller Testing Items
4. Touch to move selection box to Yes and press
to confirm, the monitoring controller and main
unit will enter auto pairing mode.
Your smart air purifier monitoring controller can monitor PM2.5, CO
2
and TVOC concentration.
When paired with LIFAair smart air purifiers, it can automatically control purifier main unit and maintain PM2.5 concentration in a healthy range.
It can also monitor temperature and humidity.
The monitoring controller will monitor air quality. There are six levels: good, moderate, unhealthy for sensitive groups, unhealthy, very unhealthy,
and hazardous. American standards will be more stringent.
In the main interface press and to switch to
PM2.5 interface.
The Chinese standard requires PM2.5 level to be below
35
μ
g/m
3
. American standard requires PM2.5 to be under
12
μ
g/m
3
. It takes about 40 seconds for the value to
stabilize.
PM2.5 measurement
"
SMART
Purifier Pairing
Language
Standard
WiFi Login
"
SMART
English
English