7
9
10
8
6
5
Initial Installation
Use
Over 20cm
Over 20cm
Over 20cm
Correct positioning
To achieve the best possible performance of the air purifier, the air
inlets should maintain a certain distance from the walls and other
obstructions when using the purifier.
Remove the protective strip on the DC power connector, take out the power cord
and connect to the power adapter. Connect the adapter to the main unit and then
connect to the power source. The main unit will be in standby mode, LED lights will
be flashing slowly.
Connect the power supply
Manual control fan speed
The machine is designed with 121 wind speed and it can precisely control the
PM2.5 level.
Touch the top circle of the main unit and rotate clockwise to increase the fan
speed (Continuously rotate clockwise until the power light remains constant
indicating maximum wind speed).
Touch the top circle of the main unit and rotate counter-clockwise to reduce
wind speed (Continuously rotate counter-clockwise until the power light blinks
slowly in a breathing pattern for zero wind speed and enter standby mode).
Note: Above diagrams are for reference only, please prevail in kind.
Make sure the bulges and grooves are fastened after placing the
carbon plates into the main unit.
Close the bottom cover.
Lock the bottom cover (be sure to rotate the bottom cover to
the lock position).
The installation is completed. Flip the main unit carefully back to
the upright position.
English
English
