manualshive.com logo in svg

Liesegang ddv 1111, User Manual, Page: 14 / 34

Share
Download
Liesegang ddv 1111 User Manual Download Page 14

Standby / Projector Power Down                                                                                                   

_______________________________________________________________

13

Data Video Projector

User Manual

3.2             Standby Mode

When the projector is not being used, place it into standby mode.

1. Press the Standby button 

.

2. The lamp will switch off and the Standby button 

 

will illuminate red.

 Note: The fan motor will continue to run for a few minutes until the projector
cools down and then the fan will turn off.

3. Press again the Standby button 

 

to illuminate the lamp and project an

image on the screen.

3.3            Projector Power Down

1. Press the Standby button 

 

to place the projector in standby mode. The

Standby button is illuminated red.
2. Wait until the cooling fan motor cycles off.
3. Press the Main Power switch to OFF.
4. Turn off the power to your input devices.
5. To transport the projector, disconnect all power and connection cables.

Note: Switching the main power off before the fan has cycled off will
decrease the life of the projection lamp.

Summary of Contents for ddv 1111



































Reviews:

No comments