Liemke KEILER-1, Operating Manual

Page: 66 / 204

66
Malfunction Possible reason Remedy
Photo or video recording
does not work.
20 seconds have not
elapsed after the unit
was booted up.
Wait 20 seconds after switching on the unit
before you start taking photos or videos.
Some defective pixels can-
not be permanently de-
leted.
The defective pixel
is not recognised by
the unit.
Switch the calibration to M mode and
wait until the pixel is very clearly visible.
Then carry out the error pixel correction
("Advanced settings" menu). Then switch
back to A mode.
The LIEMKE app does not
connect to the unit.
WiFi is not activated. Activate the WiFi of the unit in the menu.
The mobile terminal is
not connected to the
KEILER-1-WiFi.
Connect your mobile end device to the
WiFi of KEILER-1.
Battery
Malfunction Possible reason Remedy
The battery charges very
slowly or not at all.
Using a power supply
unit with insufficient
power.
Use a suitable power supply unit as spec-
ified in the operating instructions for the
KEILER-1 or CHARGER-K.
The battery is deeply
discharged.
Charging takes a significantly longer time
for deeply discharged batteries.
16. DISPOSAL
Do not dispose of waste electrical equipment and batteries in the
household waste. Hand in used electrical appliances and batteries
at the local recycling collection point. Batteries should be fully dis-
charged when disposed of.
We are participating in INT Verbund. The device compo-
nents can be taken to plastic and metal recycling for disposal.
Disposing of the battery
> Before disposing of the battery, make sire it is fully discharged.