Liebert 130 kVA, User Manual

Page: 5 / 102

User Manual
Hipulse - Single Phase ‘1+N’ UPS System 130 kVA - 110V
Rev. No. Revision details Date
IMPORTANT
This manual contains information concerning the installation, operation and
maintenance of the Hipulse Uninterruptible Power System (UPS) for the single module
and one plus one Systems.
All relevant parts of the manual should be read prior to commencing installation.
The UPS must be commissioned by an engineer approved by the manufacturer (or his
agent) before being put into service. Failure to observe this condition will invalidate
any implied warranty.
The Hipulse UPS has been designed for Commercial / Industrial use only.
The Hipulse has not been designed for direct use in any life support application.
If you encounter any problem with the procedures contained in this manual you should
seek immediate assistance from Emerson Network Power (India) Pvt. Ltd. Sales Office
from whom the equipment was purchased. Alternatively contact the Emerson
Network Power (India) Pvt. Ltd Customer Service & Support department at the
address shown below:
EMERSON NETWORK POWER (INDIA) PRIVATE LIMITED
Plot No. C-20, Road No. 19
Wagle Industrial Estate
Thane – 400 604, INDIA
Phone : (00 91 22) 25807000
25828405
Fax
: (00 91 22) 25800829
25828358
Emerson Network Power (India) Private Limited pursues a policy of continual product
development and reserves the right to change the equipment without notice.
@ Copyright 1999 by Emerson Network Power
Unauthorized reproduction prohibited
All rights reserved