lieber Drone 280, User Manual

Page: 21 / 25

www.lieber-rc.com
21
6.3 Battery Installation
Used all-in-one flight control system board As all the parts are
assembled and adjusted by our company, it’s easy and simple for you,
just connect your battery to the input power built in XT-60 socket.
Put the battery into the Drone 280, and adjust the battery to balance
the head and tail. Then fix the battery by belt.
7.0 Ready for flight
7.1 Binding of the Drone 280
1) Put all the function switches to the 0 position, put all trims / knobs to
the Middle position, move the throttle to the lowest position, then turn
on the radio.
2) Put the aircraft in horizontal position, then connect the aircraft power.
3) After 5 sec. The drone indicating that the code binding has finished.
7.2 Motor Unlock /Lock
Motor Unlock
After binding the Remote to the
Drone 280, Check that all trims are
neutral, the throttle stick is All the
way
Down with the display
indicating 0% throttle. Check that All
switches are in the UP position. Gently push the throttle stick down and