English
•
Unpack the scale and remove packing material, place the scale
on a strong and stable surface.
•
Remove transport spring which is located under the top platform.
•
Make sure all screws that are connected to the load support
are tightened.
•
Press on the load support a few times to remove any tensions.
•
If the pointer does not indicate ”0”, adjust with the brass
screw located under the load support.
OBSERVE!
- If the weighing object is too big there is a risk that the object
could fall off the load support and hurting the user.
- The objects weight center must always be as close to the
center as possible.
www.liden-weighing.se
KC-serien SE-EN 17-10-02
Page - 2 - of 2
