T260 Series Router User Manual
Shenzhen Libtor Technology Co.,Ltd
Page 7 of 43
Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.
Web:http:www.libtor.com Tel: 86-755-28345166-807 Fax:86-755-28345166-804
Mail:[email protected]
Front side
:
1:indicator ( details listed below)
3
: USB connector
(USB2.0&USB3.0)
4: Reset button
4
:SIM/UIM card slot
Back side :
1: 3G/4G Antenna (3G/4G ATN1, 3G/4G/GPS ANT2)
2: WiFi Antenna (WIFI ANT1,WIFI ANT2)
3: UART connector: default type is R232 connector. You need to customized if you
need R485 connector.
4: LAN1/LAN2: RJ45 connector, LAN1 can be used as WAN port if LAN1 is in the
standard router mode.
5: DC connector: 2.1mm standard round-head connector and 5.08 connection line port
with self lock, Inner”+”.Outer:”-“
，
the Voltage Output is 6-35V
，
the power is larger
than 10W
。
Indicator state specification
Name
State
Description
System
light(SYS)
Constant
light
Constant light when power supplied, It shows power supply
is normal.
Flash
slowly
The light state will change from constant light to flash
slowly which it takes about ten seconds when connect
electricity
Flash
quickly
1.The SYS light will flash quickly when it approach preset
cashflow value.
2.The SYS light will flash quickly when press reset button
for 5 seconds. Then system will restart later.
Connection
Internet light
(LINK)
Constant
light
Connection successful
Flash
slowly
Normal connection
Power
off
No connection
