Librex WP-020, Operation Manual

Page: 9 / 24

REVERSE OSMOSIS WATER DISPENSER
E-P.8
13-1 13-2 13-3
Water
Drain
Outlet
A
B
VII - AFTERSALE SERVICE
When the icon flash,pls contact after-sales personnel to replace the filter
7.
To prevent the machine from damage caused by freezing, please drain off the remaining water and stop operating the
machine if the environment temperature during its working is below 0℃.
8.
If there is any damage to the power cables, the cables must be repaired or replaced by an authorized person to avoid
danger.
9.
Please make sure the person who is not have completed body, sensory or mental disabilities, or lack of experience
and knowledge (Children included) to use the machine under the supervision and guidance of who is responsible for
their safety.
10.
Make sure the children do not use the machine.
11.
The product only applies to household use and similar purposes.
12.
The maximum inlet water pressure 0. 6Mpa.
The minimum inlet water pressure 0.1Mpa.
The instructions for the appliances connected to the water mains by detachable hose- sets
When changing it, the new hose-sets supplied with the appliance are to be used and the old hose- sets should
not be reused.
13.
The way of drainage
-
①
Turn off the power first if you want to drain water from the hot tank water drain outlet .(Diagram3-1).
②
First press A firmly from the inside, then pull out B hard from the outside.(Diagram 3-2).
③
After B is pulled out, the water will drain from the hot tank water drain outlet.(Diagram 3-3).
④
Be careful with hot water
After-sale service
address
After-sale service
phone no.