LIBRETTO 50-55-56 N Operating Instructions Manual Download Page 7

11

12

AIR COMPRESSOR 3-GALLON (11.4 L) - 058-8381-8

AIR COMPRESSOR 3-GALLON (11.4 L) - 058-8381-8

ASSEMBL

Y

Assembly

1. 

Unpack the air compressor. Inspect the unit for damage. If the unit has been damaged, contact the 
retailer immediately.

IMPORTANT!

 If any parts are missing or damaged, or if you have any questions, 

please call our toll-free helpline at 1-877-888-3872.

THE CARTON SHOULD CONTAIN:

•  Air compressor

•  Air hose

•  Owner’s manual 

•  Accessory kit:

ACCESSORY

QTY

Blow gun

1

1/4" Quick connector

1

Tire chuck

1

Inflation needle

1

Blow gun adaptor

  

1

Tapered nozzle

1

Plumber's tape

1

TOOLS REQUIRED FOR ASSEMBLY (NOT INCLUDED):

 

ACCESSORY

QTY

11/16” open- end wrench or

1

Adjustable wrench

1

Cross-headed screwdriver

1

2. 

Check the air compressor’s identification label to ensure that you have purchased the intended 
model and that it has the required pressure rating for its intended use.

3.  Positioning of the air compressor:

a.  Position the air compressor near an electrical outlet.

b.  The compressor must be at least 12” (31 cm) from any wall or obstruction, in a clean, well-

ventilated area to ensure sufficient air flow and cooling.

c.  Place the air compressor on the floor or a hard, level surface. The air compressor must be 

level to ensure proper drainage of the moisture in the tank.

> 12" /  

31 cm

W

all

ASSEMBL

Y

ASSEMBL

Y

058-8381-8-Air-Compressor-3G-EN-07.indd   11-12

5/9/12   2:24 PM

Summary of Contents for 50-55-56 N














Reviews: