LS5B User Guide
Libre Wireless Technologies User Guide: LS5B, Ver. 2.9 Page
10
of
78
Libre Confidential
Figure 2-2: LS5B EVK (3.0) Peripherals
2.1.
LS5B EVK Setup
To setup the LS5B EVK and get started proceed as below
Step 1.
Ensure the LS5B module is inserted in the EVK
Step 2.
Connect the USB-to-Serial Cable from Serial port of EVK to USB port of
Laptop
Step 3.
Connect the Power adaptor to DC Jack on EVK
Step 4.
Power On the EVK, using ON/ OFF Switch
Step 5.
Open the terminal tool (Hyper Terminal / Teraterm) on your laptop
Step 6.
Configure the Serial settings, as below
-
Baud Rate at 57600
-
Data Bits at 8
-
Parity at None
-
Stop Bits at 1