6
OPERATING INSTRUCTIONS
1
FIGURE 1
FIGURE 2
FIGURE 3
FIGURE 4
Pull up on handle knob located on the swing arm (C) then
rotate hose reel (E) to one of the four locking positions.
3
Release the handle on the swing arm (C) and lock unit into one
of the four desired positions. Your Single Arm Navigator rotating
hose reel is now ready for use.
4
Located at the bottom of the base spool (E) near the crank
handle is a pre-assembled Allen screw. Using the supplied
Allen wrench (AA) tighted or loosen tension on the spool.
To increase the tension, tighten the screw, to reduce
tension, loosen the screw.
2
Pull up on the handle knob located on the swing
arm (C) and turn the locking pin to the up position.
The Single Arm Navigator rotating hose reel will
now turn a full 360 degrees.
E
TIP:
Keep reel in the locked position when winding garden hose.
C
C
D
E
AA
