Liberty AV Digitalinx DL-44E-H2-KIT Quick Install Manual Download Page 3

DL-44E-H2-KIT  Quick Guide

3

The DL-44E-H2-KIT is an HDMI 2.0 compatible 4x4 matrix switcher kit which consists of an HDMI and 

HDBaseT matrix switcher, 3 compatible HDBaseT receivers and accessories. The HDMI and HDBa

-

seT matrix switcher features 4 HDMI inputs, 3 HDBaseT o 1 HDMI output. Digital and/or 

analog audio can be de-embedded from the 4th output (HDMI). The matrix switcher supports EDID                     

management, is HDCP 2.2 and HDMI 2.0 compliant. The 3 HDBaseT transmitter outputs are compat

-

ible only with the 3 HDBaseT receivers that are included with the kit. The HDBaseT extender circuits 

are capable of extending 4K/60Hz 4:4:4 signals up to 40m, 1080p up to 70m all while powering the 

remote receivers using CAT6 F/UTP rated cable for each extension circuit. The HDBaseT receivers can 

also extend bi-directional IR that can be free-routed from the HDBaseT receiver locations to the local 

switcher to allow flexible control of sources or devices living in the A/V headend.

The DigitaLinx DL-44E-H2-KIT can transport HDMI data rates up to 18Gbps over HDBaseT. The system 

enables high data rates by utilizing visual lossless compression at a 2:1 data compression rate when 

the signal surpasses 10Gbps, anything under 10Gbps will never be compressed. Supports static HDR 

(HDR10) only when data rate exceeds 18Gbps, supports dynamic HDR (HDR10+ / Dolby Vision) when 

data rate is 10Gbps or less.

The switcher kit can be controlled either by front panel buttons, IR remote, TCP/IP, RS232 or by the 

internal built in web GUI/server. For a list of available control IP and RS232 control commands for, 

please see the owners manual for this product located online at 

www.libav.com

.

Product Overview

Package Contents

• 

4x4 HDMI 2.0 and HDBaseT Matrix Switcher

• 

(3) 70m HDBaseT Receivers

•  Quick Install Guide
• 

(1) IR Remote

• 

(4) IR Emitters

• 

(4) IR Receivers

• 

(1) 5-pin Phoenix connector

• 

(1) 3-pin Phoenix connector

• 

(1) DB9 to 3 pin Phoenix Adapter Cable for RS232

• 

(1) DC24V 2.71A power supply with US, UK, EU and UA power plugs

• 

(8) Rack mount ears with 8 mounting screws

• 

(4) Plastic Cushions

Summary of Contents for Digitalinx DL-44E-H2-KIT













Reviews: