DL-SP Installation Guide
Important notice:
•
Do not attempt to disassemble or alter the extender housing. There are
no user-serviceable parts inside the unit. Doing so will void your warranty.
•
To minimize the possibility of equipment damage from electrostatic
discharge (ESD), all source and destination equipment must be powered off
during installation.
•
Do not connect the extender to a telecommunication outlet wired
to unrelated equipment. Doing so may damage the unit or any connected
equipment.
•
Allow proper ventilation to reduce the risk of thermal failure.
The DigitaLinx DL-SP is an HDMI Surge Protector. The DL-SP is an ideal solution designed
to protect HDMI devices against electro-static discharge, surges & spikes from mains, or
lightning strikes that cause electrical transients up to 15000 Volts (air) and 8000 Volts
(contact).
The DL-SP offers 3D, HEC and ARC passthrough from compatible source to sink devices.
The DL-SP is active on all HDMI TMDS channels offering lossless signal transmission
while performing as the best line of defense against ESD and lightning surge. DL-SP
provides hassle-free install with integrated mounting brackets and passive design
without requiring a power supply.
