Liberton LMG-205TS, Customer'S Manual

Page: 3 / 21

1. Hopper plate 16. Tomato attachment bracket
2. Motor housing 17. Adjustable screw
3. ON/OFF/ Reverse switch 18. Sreen
4. Locking knob hole 19. Tomato attachment snake
5. Locking knob 20. Dam-board
6. Food pusher 21. Vegetable pusher
7. Head 22. Vegetable cutting head
8. Feed screw 23. Vegetable cutting of tooth sets
9. Cutting plate (fine) 24. Bushing
10. Cutting plate (medium) 25. Shuan deduction for the sliced
tube
11. Cutting plate (coarse) 26. Spring
12. Fixing ring 27. Strip cutter
13. Cutting blade 28. Shredded cutter
14. Sausage attachment 29. Slice cutter
15. Kebbe attachment
IMPORTANT SAFEGUARDS

Household use only. Do not use for industrial purpose.

Unplug from outlet when assembling and disassembling the unit.

Close supervision is necessary, when any appliance is used near
children.

When carrying the unit, be sure to hold the motor housing with both
hands. Do not carry the unit by holding only the hopper plate or
head.

Do not fix the cutting blade and cutting plate, when using kebbe
attachment.

Never feed food by hand. Always use food pusher.

Do not grind hard food such as bones, nuts, etc.

Do not grind ginger and other materials with hard fiber.

Continuous running of meat grinder should be not more than 10
minutes with the following 10 minutes interval for motor cooling.

Reverse function is prohibited while the appliance is operating (For
example switch “ON” knob to “R” knob or on the contrary), wait at
least one minute until grinder has come to a complete stop.
Otherwise it may cause an abnormal noise, vibration or a transitory
electric spark in the appliance. It could result easily damage to
appliance and make the user frightened.

After use, there would be a little food left in the grinder head. This
is normal. There might be a bit of black metal powder adhering to
the food ground in the end. Please pick them out and throw away,
do not eat them.

To avoid jamming, do not force to operate the unit with excessive
pressure.

When the circuit breaker activates, do not switch on.

Never try to replace the parts and repair the unit by yourself.
FOR THE FIRST TIME

Check that voltage, indicated on the rating label, corresponds the
mains voltage in your home.

Wash all parts (except body) in warm soapy water.

Before plugging in, ensure the “ON/OFF/ Reverse switch is turned
to " OFF " position.
4 5