Libelium Waspmote Smart Parking v2, Technical Manual

Page: 37 / 155

Smart Devices App
5. Smart Devices App
Libelium Smart Devices App is an software tool developed by Libelium that allows users install new fi rmware
versions and program the con fi guration of the new Libelium devices in a few clicks. At the moment it is only
available for Smart Parking and MySignals products, but the list will be incremented shortly.
Figure : Smart Devices App is connected to the node via USB
5.1. How to install the Smart Devices App
First of all and before installing anything, users have to take into account the platform where the application is
going to be installed. To install the Smart Devices App , it is compulsory to have installed the JRE 1.8 or JDK 1.8. If it
is not installed in the computer, you can download it from the website below and follow the steps described:
https://docs.oracle.com/javase/8/docs/technotes/guides/install/install_overview.html
https://www.oracle.com/technetwork/java/javase/downloads/jre8-downloads-2133155.html
Once installed JDK or JRE, users can download the application in the link below, selecting the appropriate Operating
System and architecture:
http://www.libelium.com/development/smart-parking/software-and-applications
Then customers only have to extract the content of the SmartDeviceApp zip fi le downloaded in a place with the
right permissions, and fi nally execute the fi le called “ SmartDeviceApp” that will initialize the application. Please,
note that the extension of this fi le will depend on the operating system the user is using at the moment (.sh for
Linux and OSX, and .bat for Windows).
This new Smart Devices App uses a new programmer under the hood called STM32CubeProgrammer, so it is a
good practice to before using the Smart Devices App :
https://www.st.com/en/development-tools/stm32cubeprog.html
- 36 - v7.5