Libelium Waspmote Smart Parking v2, Technical Manual

Page: 29 / 155

Smart Parking node
LoRaWAN RX1 Delay 1000 (should not be changed)
LoRaWAN Subband 8-bit bitmap
3.7.7. Con fi gure new parameter values
The Smart Devices App and the Remote Con fi guration Form allow the user to con fi gure new parameters to the
node. The 1st one is a desktop Java application which implies opening the node enclosure and plug a micro-USB
cable to the node. The 2nd one is a form allocated in the Libelium Smart Parking Cloud Service or in the Customer
Server, which permits to remotely change some of the node parameters.
Regarding the time and sensor parameters, the same values are set to all nodes manufactured by Libelium. The
default values can be seen in the previous section. However, the customer can con
fi gure the time and sensor
settings using both Smart Devices App and Remote Con fi guration Form.
Regarding the LoRaWAN parameters, all keys are randomly generated for each node and kept secret. The DevEU I
set to the node is the LoRaWAN hardcoded EU I which is unique for each radio chipset. However, the client can
con fi gure/modify all LoRaWAN parameters using the Smart Devices App only (the Remote Con fi guration Form does
not permit it).
Note : For further information about this matter please refer to the “ Smart Devices App ” and
“ Remote Con fi guration Form ” sections.
- 28 - v7.5