-34-
v7.0
Sigfox
12. Sigfox
This section explains how to route the information received from the Sigfox platform to the back-end web server application
installed,deployed and configured in section 3 generating a response when needed.
12.1. Device configuration
In first place, configuring a new Group in the Sigfox back-end is a must:
•
1. Hitting on group top menu section, the parent group it is displayed.
•
2. Then, before creating a new one, we have to be sure that it does not exist. We can’t create two same groups in the same
level, in this case an alert is shown while the form is saved noticing the error. If the group exists, we have to skip the rest of
these steps and jump to the Device Type paragraph.
•
3. We are ready now to create the new group clicking in “New” button. In the next pop-up windows, you have to select the
parent group clicking on it. Finally, fill in the form with the information required, checking the parent group written matches
the one chosed in the previous step.
Figure : Group creation schema
