LI-COR LI-6400, Manual

Page: 734 / 846

LPL Reference
The Reference
24-30 Using the LI-6400
24
DIOSETPORT Set multiple pins in a port
Initial: Num stateWord, Num maskWord, Num port
Final: -
Related Keywords:
DIOGETPORT
DIOSTATUS
Return directional capability and status of a port
Initial: Num
port
Final: Long
status
(bits: 0=can do input, 1=can do output, 2=is set for input).
DIRALL
Get list of all directories in the file system
Initial: [Path
dest
]
Final: -
If dest is not present, default destination is LCD. Returns the latest list, but will scan
if necessary.
Related Keywords:
FLIST , FILER
DIRCURR Obtain the current default directory.
Initial: [Text dest ]
Final: -
The default dest is the standard path LCD.
Related Keywords:
DIRSET
DIRERASE
Remove a directory from the file system
Initial: Text
filename
, [Num
all
(non-zero = remove dir even if not empty)]
Final: Long error (0=ok, 1=dir not found, 2=not empty, -1=failed)
Related Keywords: FERASE
DIRMAKE Create a new directory
Initial: Text newName
Final: Long error (0=ok, -1=failed)
Note that you cannot create a directory in the root on the LI-6400, since items in the
root are determined by hardware.
DIRSAVE Force an update of the flash file system
Initial: -
Final: -
This function is generally not required.
DIRSET Sets the current default directory
Initial: Text filename
Final: Long error (0=ok, non-zero=failed)
Related Keywords:
DIRCURR
For a discussion of the
DIR_
keywords, see File System
on page 23-46
.