LI-COR LI-6400, Manual

Page: 274 / 846

Data Logging
AutoProgram Descriptions
9-30 Using the LI-6400
9
Note: Bug in 3.01
ÒRemote ControlÓ in OPEN 3.01 does not function correctly. This has been
fixed in OPEN 3.2.
ÒTimedLampÓ
TimedLamp allows you to program timed changes in the 6400-02 or -02B
LED source. For example, you may want to set the light level to
200 µmol m
-2
s
-1
for several minutes, then jump to 2000 µmol m
-2
s
-1
for
20 seconds, then drop back to the original value for several more minutes.
TimedLamp lets you do this. You can also specify the logging frequency for
each lamp level. You may, for example, want to record data less frequently
during the initial stability period, and very frequently when the light changes.
■ ■ ■ ■
TimedLamp prompts
1 Get Data from Keyboard or File
Press
K
to enter the programÕs set points from the keyboard (if you do this, go
to Step 3). Or, press F to use a previously entered set of points (if you do this,
go to Step 2).
2 Select TimedLampÕs Steps
You are asked to select a file from those in the directory Ò
/User/Configs/Auto-
Progs/TimedLamp Defaults Ó.
Get data...
K - from Keyboard
F - from File
Timed Lamp Program
DIR: /User/Configs/AutoProgs/TimedLamp Def
"JoeÕs test"
"Dflts"
Select TimedLamp Specs
+
"Sunfleck 4"
"Sunfleck 2"
Dir
¨ ¨ ¨
CANCEL
¨
SELECT