LI-COR LI-6400, Manual

Page: 251 / 846

Data Logging
Determining What is Logged
Using the LI-6400 9-7
Determining What is Logged
The quantities logged and their arrangement are determined by the LogList,
which is a list of system and user ID numbers to be logged. Logging Control
(in the Config Menu) provides an editor for making changes to this list.
Logging Control
The Logging Control screen (Figure 9-8) shows the format file in use (the
LogFormat= configuration command), and some status information.
Status information can include:
Écontains <n> items
The number of items in the Log Format list.
Figure 9-8. The Logging Control program.
LogList LogList Show WhatÕs
Editor QuikPik Items Missing Quit
+
LogBeep Close
ON Logging +
Log Destination: <inactive>
LogFormat= ÒReneeÕs FormatÓ
...contains 26 items
...lacks 1 item for RECOMPUTING
...contains 2 undefined items
Logging Control
These messages
only appear as
needed.
The LogFormat
file and number
of items.
Only appears if
logging is active. Toggles on/off
the beeps associ-
ated with logging
To modify en-
tries in the Log
Format List.
To pick a different
(and existing) Log
Format List.
Append the Log List items to the information in the window.
Shows the missing items,
and gives you the option
to add them to the list.
If logging is active (from
New Msmnts mode), the
destination will be shown
(file, memory, comm port).