LI-COR LI-6400 Manual Download Page 190

Page: 190 / 846

Standard Tools

Standard Edit

5-14

Using the LI-6400

Table 5-5.

Function key definitions for Standard Edit.

Label

Action

BlkSTRT

Mark the current cursor location as the start of the select-
ed text block.

BlkEND

Mark the current cursor location as the end of the select-
ed text block.

BlkCPY

Copy the selected text block to the current cursor loca-
tion, where it is inserted.

BlkMVE

Move the selected text block to the current cursor loca-
tion, where it is inserted. It is removed from the original
location.

BlkDEL

Delete the selected text block.

BlkPRNT

Copy the selected text block to the RS-232 port.

BlkWRT

Store the selected text block as a file, whose name you
are asked to enter using Standard File Dialog.

BlkREAD

Insert a file at the current cursor location. You are asked
to name the file using Standard File Dialog.

PRINT

Print the current contents of the buffer being edited to the
comm port.

Find

Search for a target string, which you enter. The search
starts at the current cursor location, and goes to the end
of the file.

ReFind

Find the next location of the current target.

Find

ReFind

DelLn

ClrEnd

DelChar

CapLock

AnyChar

BlkSTRT

BlkEND

BlkCPY

BlkMVE

BlkDEL

BlkSTRT

BlkEND

BlkPRNT

BlkWRIT

BlkREAD

Figure 5-12. The four level of function keys defined in Standard Edit.

Summary of Contents for LI-6400















































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LI-6400

Reviews:

Related manuals for LI-6400

Brands by name

Popular brands

LI-COR LI-6400, Manual

Search results

Summary of Contents for LI-6400

Reviews:

Related manuals for LI-6400

Brands by name

Popular brands