LGMG A14JE, Maintenance Manual

Page: 11 / 16

Maintenance Manual of Elevating Work Platform
6
1.6 Details of A14JE Maintenance Parts
Period
Material Code Material Name Specification Unit Qty Remarks
100h / Lithium grease / / Appropriate
Rotary support,
first 50h
2000h / Lithium grease / / Appropriate Wheel bearing
1000h 4120001128001 Filter element SPX-06×10 Piece 1
Hydraulic Oil
return filter(If
equipped)
1000h 5301000007
Gear oil GL-5
85W-90 barrel
SAE85W/90GL-5 L 0.68*2
For the first-time
operation of the
reducer,
replenish oil after
150h. Later,
replenish oil
every 250h.
1000h
4120001424
Oil suction filter
WU-63x180-J
WU-63x180-J Piece 1
4120001427 Air filter EF2-32 EF2-32 Piece 1
1000h
(or
every
year)
5301000175
Hydraulic oil
L-HV32#
L-HV32# L 30
Hydraulic oil
analysis
Maintenance items of every level are given in the following table
Period
Description Maintenance measures Remarks
250h Battery
Charging with matching
charger
1. No matter whether the battery is loaded or not, if
the battery is not charged for a long time, the
service life of the battery will be shortened.
2. For the battery that has been loaded, in addition
to the above maintenance measures, the power
main switch should be disconnected timely when
the battery is not in use for a long time
Add distilled water
Check whether the battery plate is bare. If the plate
is bare, only add water to the discharged or partially
charged battery. In this case, add water just above
the plate, then charge the battery, then add water to
3mm/0.12in below the exhaust well (plastic cover in
the exhaust hole), and reassemble the vent cap
after adding water.
250h Harness Check electrical wiring
1. Check whether there is burned, worn, corroded,
extruded and loosen wiring
2. Check whether all harness joints except
connectors are coated with sufficient insulating
grease.