59
Reference
G
The remote control is a multi-brand or universal remote control. It can be programmed to operate most
remote-controllable devices of other manufacturers.
Note that the remote control may not control all models of other brands.
Programming the Remote
Programming the Remote
ENTER
TV
TV
INPUT
INPUT
DVD
RATIO
EXIT
VOL
EZ SOUND
INFO
ADJUST
EZ PIC
FLASH
BACK
MUTE
CH
TIMER
CC
SAP
MENU
VCR
POWER
1
2
3
4
5
6
7
8
9
0
FAV
COMP1
MODE
COMP2
HDMI
RGB-PC
Programming a code into a remote mode
Test your remote control.
To find out whether your remote control can operate the component
without programming, turn on the component such as a VCR and press
the corresponding
MODE
button (VCR) on the remote control, while
illuminating on the selected component. Test the
POWER
button to see
if the component responds properly. If not, the remote requires pro-
gramming to operate the device.
Turn on the component to be programmed, then press the correspond-
ing
MODE
button on the remote control.
Press the
MENU
and
MUTE
buttons simultaneously for 2 seconds, the
button selected component lights on the remote control. If you don't
press any button for 20 seconds, the button selected component will turn
off on the remote control. At a moment, you have to repeat from step 2.
Enter a code number using the number buttons on the remote. When
pressing the button, the light is blinked at a time. Programming code
numbers for the corresponding component can be found on the follow-
ing pages. Again, if the code is correct, the device will turn off.
Press the
MENU
button to store the code. After blinking twice, this code
is stored.
Test the remote control functions to see if the component responds
properly. If not, repeat from step 2.
1
2
3
4
5
6
Summary of Contents for Z42PX3D
Page 66: ...66 ...
