- 1-7 -
Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
SERVICE INFORMATION FOR EEPROM
1. Push Remote control '2' key and Front 'STOP' at the same time for 5 seconds.
• VFD: If released before 'Write OK' shows, EEPROM option does not change.
• LED: If released before 'UP OK' shows, EEPROM option does not change.
2. When entering in version setting mode, Option number can be changed by pushing left and right navigation
keys in circulation.
3. When entering in version setting mode, following option settings can be changed by pushing up or down
navigation keys.
4. When entering in version setting mode, all keys (except navigation key and enter key) works normal, but
FLD shows option setting info. continuously.
5. When Option setting is done, push ENTER key then FLD displays 'WRITE OK'.
6. Then, to change to E2P CLR status push Remote '2' key and Front 'STOP' at the same time, and set
power off, then option settings are done successfully.
NAME
OPT 0
OPT 1
OPT 2
OPT 3
OPT 4
HEX
02
48
C0
00
00
MODEL : XB12
2
3
4
1
16
15
14
13
9
10
11
12
5
6
7
8
RDS
RDS
PTY
PTY
