9
Setting the Clock
1. Turn the power on
2. Press for at least 2 seconds
3. Choose from either:
AM 12:00 (for an am and pm
display) or 0:00 (for a 24 hour display).
4. Confirm your selection
5. Select the hours
6. Press
7. Select the minutes
8. Press:
The clock setting is finished.
ON UNIT
1
1
/
]]
CLOCK
.
/
>
SET
.
/
>
SET
.
/
>
SET
Using an USB device
You can enjoy media files saved on an USB device by connecting the
USB device to the USB port of the unit. For [Creating your own playlist]
and [Random/Repeat play], refer to the CD playback section.
1. Connect the USB device to the
USB port of the unit.
2. Select the USB function.
3. Select a file you want to play.
4. Start your media playing.
5. To stop, press
6. Before disconnecting the
portable USB device, change to
any other function.
-
FUNC.
.
.
/
>
>
B
B[]
x
x
STOP
FUNC.
-
FUNCTION
.
. b
bb
b
/
B
BB
B >
>
B
B
/
[]
x
x
FUNCTION
ON UNIT
ON REMOTE
Using your player as an alarm clock
1
Turn the power on.
2
Press and hold
TIMER
Each function, EX) TUNER, CD.... flashes.
3
Press
SET
when the function you want to be woken by is showing.
4
Choose one of them by pressing
SET.
5
“ON TIME” will be displayed. Then you can set the time you want the alarm to
go on. Press
.
/
>
to change the hours and minutes and
SET
to save.
6
“OFF TIME” will be displayed. Then, you can set the time you want the
function to stop. Press
.
/
>
to change the hours and minutes and
press
SET
to save.
7
You will be shown the volume (VOL) you want to be woken by.
Use
.
/
>
to change the volume and
SET
to save.
The clock icon “
” shows that the alarm is set.
8
Press
TIMER
button 2times. You can check the setting status.
Notes:
• If you set the clock time, you can check the time by pressing
CLOCK
even
when the player is turned off.
• If you set the clock time and alarm, you can check the alarm icon “
” by
pressing
CLOCK
even when the player is turned off.
Setting the asleep time
1
Press
SLEEP
repeatedly to select delay time between 10 and 90 minutes,
after the unit will be turned off.
2
To check the remaining time, press
SLEEP
.
3
Press
SLEEP
once while “
SLEEP 10”
is displayed, to deactivate sleep function.
DIMMER
Press
SLEEP
once. The LED (Light-emitting diode) of front panel is turned off
and the display window will be darken by half. To cancel it, press
SLEEP
repeatedly until dim off.
Compatible USB Devices
• MP3 Player : Flash type MP3 player.
• USB Flash Drive : Devices that support USB 2.0 or USB 1.1.
• The USB function may not be available depending on devices.
• Devices which require additional program installation when you have
connected it to a computer, are not supported.
Look out for the following
• Do not extract the USB device while in operation.
• For a large capacity USB, it may take longer than a few minute to be
searched.
• To prevent data loss, back up all data.
• If you use a USB extension cable or USB hub, the USB device is not
recognized.
• Using NTFS file system is not supported. (Only FAT(16/32) file system is
supported.)
• This unit is not supported when the total number of files is 1000 or more.
• External HDD, Locked devices or hard type USB devices are not supported.
• USB port of the unit can not be connected to PC. This unit can not be used
as a storage device.
XA64-D0U-AHUNLL-ENG 11/13/09 2:07 PM Page 9