background image

2

This lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltage within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons. 

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of impor-
tant operating and maintenance (servicing) instruc-
tions in the literature accompanying the product.

WARNING:

Do not install this equipment in a confined space

such as a book case or similar unit.

CAUTION: 

Do not block any ventilation openings. Install in accor-

dance with the manufacturer's instructions.

Slots and openings in the cabinet are provided for ventilation and
to ensure reliable operation of the product and to protect it from
over heating. 
The openings should be never be blocked by placing the product
on a bed, sofa, rug or other similar surface. This product should
not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer's
instruction have been adhered to.

CAUTION: 

This product employs a Laser System.
To ensure proper use of this product, please read this owner’s
manual carefully and retain it for future reference. Should the unit
require maintenance, contact an authorized service center.
Use of controls, adjustments or the performance of procedures
other than those specified herein may result in hazardous radia-
tion exposure.
To prevent direct exposure to laser beam, do not try to open the
enclosure. Visible laser radiation when open. DO NOT STARE
INTO BEAM.

CAUTION: 

The apparatus should not be exposed to water (drip-

ping or splashing) and no objects filled with liquids, such as
vases, should be placed on the apparatus.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicat-
ed circuit;

That is, a single outlet circuit which powers only that appliance
and has no additional outlets or branch circuits. Check the speci-
fication page of this owner's manual to be certain.

Do not overload wall outlets. Overloaded wall outlets, loose or
damaged wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous. Any of these
conditions could result in electric shock or fire. Periodically exam-
ine the cord of your appliance, and if its appearance indicates
damage or deterioration, unplug it, discontinue use of the appli-
ance, and have the cord replaced with an exact replacement part
by an authorized servicer.

Protect the power cord from physical or mechanical abuse, such
as being twisted, kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall outlets, and the point
where the cord exits the appliance.

To disconnect power from the mains, pull out the mains cord
plug. When installing the product, ensure that the plug is easily
accessible.

Disposal of your old appliance

1. When this crossed-out wheeled bin symbol is

attached to a product it means the product is cov-
ered by the European Directive 2002/96/EC.

2. All electrical and electronic products should be dis-

posed of separately from the municipal waste
stream via designated collection facilities appointed
by the government or the local authorities.

3. The correct disposal of your old appliance will help

prevent potential negative consequences for the
environment and human health.

4. For more detailed information about disposal of your

old appliance, please contact your city office, waste
disposal service or the shop where you purchased
the product.

This product is manufactured to comply with the
EEC DIRECTIVE 89/336/EEC, 93/68/EEC and
73/23/EEC.

CAUTION

RISK OF ELECTRIC SHOCK 

DO NOT OPEN

CAUTION: 

TO REDUCE THE RISK 

OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE 

PERSONNEL.

Safety Precaution

WARNING:

TO PREVENT FIRE OR ELECTRIC

SHOCK HAZARD, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.

POWER SAVE MODE - 

OPTIONAL

You can set up the unit into an economic power save mode.

In power-on status, press and hold 

STAND BY/ON (POWER)

button for about 3 seconds. 
-  Nothing is displayed in the display window when the unit 

goes into the power save mode.

To cancel, power save mode press 

STAND BY/ON (POWER).

Summary of Contents for XA102

















Reviews: