23
OPERATION
ENGLISH
Time and Status Display
e
Customizing Washing Programme Buttons
Use these buttons to adjust the water temperature or spin speed settings for the selected
programme.
• The current settings are shown in the display.
• Press the button for that option to select other settings.
f
ezDispense Buttons
• Press the
Dispenser 1
or
Dispenser 2
to select ezDispense function.
• LED will light up to indicate the selected detergent type and amount.
• When the detergent or softener is insufficient;
- In case of pressing the
Power
button : The LED will blink and the chime will sound.
- In case of running the appliance : The LED will blink .
ezDispense Nozzle Clean
• Press and hold the
Spin
button for 3 seconds to use the
ezDispense Nozzle Clean
function.
This function cleans residual detergent or softener in the hose connected to the
ezDispense(when changing the type of detergent or softener).
g
Display
• The display shows the settings, estimated remaining time, options, and status messages.
When the appliance is turned on, the default settings in the display will illuminate.
• While the load weight is sensed automatically, the display on the control panel blinks.
Description
a
Programme Status Indicators
• When a washing programme is running, LED for the active stage will blink, and the LEDs for
the remaining stages will remain steady. Once a stage is complete, the LED will turn off. If a
cycle is paused, the active stage LED will stop blinking.
Description
global_main.book.book Page 23 Tuesday, February 8, 2022 2:47 PM
