LG WTP2071 series Owner'S Manual Download Page 35

Page: 35 / 40

Symptoms

Reason

Solution

Washing machine

will not operate

Control panel has powered off

due to inactivity.

•

This is normal. Press the Power button to

turn the washing machine on.

Washing machine is

unplugged.

•

Make sure cord is plugged securely into a

working outlet.

Water supply is turned off.

•

Turn cold tap fully on.

Controls are not set properly.

•

Make sure the cycle was set correctly,

close the door and press the Start/Pause

button.

Door or drawer is open.

•

Close the door and drawer make sure

that nothing is caught under the door

preventing it from closing completely.

Circuit breaker/fuse is

tripped/blown.

•

Check house circuit breakers/fuses.

Replace fuses or reset breaker. The

washing machine will resume the cycle

where it stopped once power is restored.

Control needs to be reset.

•

Press the Power button, then re-select the

desired programme and press the Start/

Pause button.

Start/Pause was not pressed

after a cycle was set.

•

Press the Power button then re-select the

desired programme and press the Start/

Pause button. The washing machine will

shut off if the Start/Pause button is not

pressed within 4 minutes.

Extremely low water pressure.

•

Check another tap in the house to make

sure that household water pressure is

adequate.

Washing machine is too cold.

•

If the washing machine has been exposed

to temperatures below freezing for an

extended period of time, allow it to warm

up before pressing the Power button.

Summary of Contents for WTP2071 series









































Search results

Summary of Contents for WTP2071 series

Reviews:

Related manuals for WTP2071 series

Brands by name

Popular brands

LG WTP2071 series, Owner'S Manual

Search results

Summary of Contents for WTP2071 series

Reviews:

Related manuals for WTP2071 series

Brands by name

Popular brands