manualshive.com logo in svg

LG WTG9032WF, Owner'S Manual

Share
Download
LG WTG9032WF Owner'S Manual Download Page 26

26

EN

Time Delay

 

•

You can set a time delay so that the washing 

machine will start automatically and finish after 

a specified time interval.

1

Press the 

POWER

 button.

2

Select a washing programme.

3

Press the 

Time Delay

 button to set the 

required Delay ending time.

4

Press the 

START/PAUSE

 button.

NOTE

 

•

The delay time is the time to the end of the 

programme, not the start. The actual running 

time may vary due to water temperature, wash 

load and other factors.

 

•

Reservation can be made up to 18 hours by 

1-hour interval up to 3 - 12 hours and 2-hour 

interval for 12 - 18 hours.The Time Delay 

cannot be set for less than 3 hours.

 

•

To cancel the Time Delay function, press 

Time 

Delay

 button repeatedly until the reservation 

is canceled or press the 

POWER

 button to 

turn off and on power.

Intensive Wash

Press the 

Intensive Wash

 to allow a higher 

agitation intensity.

 

•

It is set to medium intensity by default. It can 

be set on all programmes except Delicates, 

Quiet Wash and Tub Clean.

Soak

 

•

Soak

 can be selected to wash heavily soiled 

clothes by soaking in water for some time to 

remove dirt and grime.

1

Press the 

POWER

 button.

2

Select a washing programme.

3

Press the 

Trubo Clean

 button to set time 

required.

4

Press each of the 

Rinse

 or 

Spin

 button to 

select the number of Rinses or the  Spin 

strength.

5

Press the 

START/PAUSE

 button.

Turbo Clean

Press the 

Turbo Clean

 button to save time and 

energy by jet spray technology.

Hot Wash / Cold Wash

 

•

Press the 

Hot Wash

 and 

Cold Wash

 buttons 

to select hot water, cold water, or hot and cold 

water(warm water).

 

•

It can be changed during operation.

 

•

If hot wash is selected, the washing will be 

done with hot water and rinse will be done 

with cold water.

 

•

Hot and cold water selected together allows a 

warm water temperature by mixing them 

during the filling. It is normal for cold water to 

enter the tub first.

 

•

Delicates programme is cold water only. If hot 

water is used, the laundry can be damaged.

 

•

Both Hot Wash and Cold Wash are 

automatically selected for the Extra Rinse 

Programme and the Tub Clean Function.

Summary of Contents for WTG9032WF

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands