LG WTG8532WH Owner'S Manual Download Page 31

Page: 31 / 40

Connecting Water Supply Hose

Water tap

Rubber Packing

Water Supply Hose

Rubber seal

Hose connector

Water tap

Rubber Packing

Water Supply Hose

Rubber seal

Hose connector

Water tap

Rubber Packing

Water Supply Hose

Rubber seal

Hose connector

Water tap

Rubber Packing

Water Supply Hose

Rubber seal

Hose connector

Water tap

Rubber Packing

Water Supply Hose

Rubber seal

Hose connector

Attach the water supply hose to the tap.

Push the water supply hose up so that the rubber

washer within the hose is properly seated to the tap.

Connect the water supply hose to the tap.

Connect the water supply hose to the tap and then

tighten it by screwing it to the right.

Securely Hand tighten only. Do not use any

mechanical device to tighten the hose connector.

Check for water leakage.

After connecting the hose to both the tap and the

machine, open the tap to check for any water leakage.

• Connect the water supply hose to the inlet valve

of the washing machine, and then turn the hose

connector to the right until secure. Do not use any

mechanical device to tighten. Hand tighten only.

• Make sure there is a rubber washer in both

connectors before connecting

Screw Type

Connecting Water Supply Hose to the machine

MFL68019741(영)호주향_MFL68019741 14. 12. 10. 오후 1:00 페이지 31

Summary of Contents for WTG8532WH









































Search results

Summary of Contents for WTG8532WH

Reviews:

Related manuals for WTG8532WH

Brands by name

Popular brands

LG WTG8532WH, Owner'S Manual

Search results

Summary of Contents for WTG8532WH

Reviews:

Related manuals for WTG8532WH

Brands by name

Popular brands