manualshive.com logo in svg

LG WTG1030SF, Owner'S Manual, Page: 22 / 44

Share
Download
LG WTG1030SF Owner'S Manual Download Page 22

22

EN

Control Panel

5

4

1

2

3

Power Button

 

•

Press the 

Power

 button to turn the washing 

machine on, or off if washing hasn't 

commenced.

 

•

The power goes off automatically about 30 

seconds after the wash is finished. 

 

Start/Pause Button

 

•

Press the 

Start/Pause

 button to start the 

wash cycle or pause the wash cycle.

 

•

If a temporary stop of the wash cycle is 

needed, press the 

Start/Pause

 button. 

NOTE

 

•

If the wash is not recommenced within 60 

minutes when in pause then the appliance 

will automatically turn off. 

 

•

For customer safety, the door will be locked 

automatically during operation. If there are 

additional laundry to put in, press 

Start/

Pause

 to unlock.

 

•

Press 

Start/Pause

 button again to resume 

operation.

1

2

Program Button

 

•

Programmes are available according to 

laundry type.

 

•

Lamp will light up to indicate the selected 

programme. 

Option Button

 

•

Press buttons to select the desired 

options. 

Display

 

•

The display shows the settings, estimated 

time remaining, options, and status 

messages. When the product is turned on, 

the default settings in the display will 

illuminate.

 

•

The process lamp will remain prior to it 

beginning. The process lamp will blink 

during that process, and the lamp will then 

turn off when that process has completed.

3

4

5

Summary of Contents for WTG1030SF













































Reviews:

No comments