33
EN
Symptoms
Reason
Solution
Washing machine
will not operate
Control panel has powered off
due to inactivity.
•
This is normal. Press the
POWER/
Auto Off
button to turn the washing
machine on.
Washing machine is
unplugged.
•
Make sure cord is plugged securely
into a working outlet.
Water supply is turned off.
•
Turn both hot and cold taps fully on.
Controls are not set properly.
•
Make sure the cycle was set correctly,
close the door and press the
START/
PAUSE
button.
Door is open.
•
Close the door and make sure that
nothing is caught under the door
preventing it from closing completely.
Circuit breaker/fuse is tripped/
blown.
•
Check house circuit breakers/fuses.
Replace fuses or reset breaker. The
washing machine should be on a
dedicated branch circuit. The washing
machine will resume the cycle where it
stopped once power is restored.
Control needs to be reset.
•
Press the
POWER/Auto Off
button,
then reselect the desired cycle and
press the
START/PAUSE
button.
START/PAUSE was not pressed
after a cycle was set.
•
Press the
POWER/Auto Off
button
then reselect the desired cycle and
press the
START/PAUSE
button. The
washing machine will shut off if the
START/PAUSE
button is not pressed
within 60 minutes.
Extremely low water pressure.
•
Check another tap in the house to
make sure that household water
pressure is adequate.
Washing machine is too cold.
•
If the washing machine has been
exposed to temperatures below
freezing for an extended period of
time, allow it to warm up before
pressing the
POWER/Auto Off
button.
Washing machine is heating
the water or making steam.
•
The washing machine drum may stop
operating temporarily during certain
cycles, while water is safely heated to
a set temperature.
