No.
n
o
it
a
n
a
l
p
x
E
s
s
e
c
o
r
P
10
Intermittent
spin
•
To reach the correct set speed, the motor rotates clockwise and
counterclockwise directions after spin process starts.
•
If the water level frequency is lower than 23.0 kHz,
a washer senses suds and starts suds removal process.
11
Rinse
spin
•
In this process, the remaining water during washing process is
extracted and the selected speed is kept.
•
Removing suds process is in active mode at this cycle.
12
Remaining
spin
•
After spin finishes, the drum rotates by remaining spin power until it
stops. Motor power is off.
•
This process is overlapped with next process.
13
Rinse water
supply
•
Water supply for rinse process.
14
Rinse
•
Rinsing process.
15
Last
drainage
•
After spin finishes and power is not supplied to motor, the drum
rotates by remaining spin power.
•
If rinse hold is selected, the drainage is not proceeded after rinse
finishes.
16
Disentangling
•
The same as item 9.
17
Intermittent spin
•
The same as item 10.
18
19
20
21
22
Main spin1
•
The same as item 11.
Main spin2
•
At the end of a main spin, the spin speed will reach the selected rpm.
Remaining spin
•
The same with item 12.
Disentangling
•
After spin finishes, disentangling starts to remove unbalanced
laundry.
End
•
After ‘end’ signal is displayed, it stays for 8 seconds and power is
automatically turned off. (Auto type door switch)
•
After door switch is off, end signal is displayed in the case of
manual type and it takes around 2 minute to turn off door switch.
17
LGE Internal Use Only
Copyright © 201
6
~ 201
7
LG Electronics Inc. All rights
reserved. Only training and service purposes.
Summary of Contents for WM4370H A Series
Page 56: ...69 P No MFL67307921 ...
