manualshive.com logo in svg

LG WM3988H*A Series, Service Manual

Share
Download
LG WM3988H*A Series Service Manual Download Page 14

13

•

PREWASH

: Use this option for loads that need pretreatment. It adds 16 minutes prewash and a spin cycle.

• 

RINSE+SPIN

: Use this option to rinse and then spin.

• 

EXTRA RINSE

: This option provides an additional rinse.

• 

STAIN CYCLE

: Adds time to the wash and rinse cycles for better stain removal. Automatically provides a rinse.

• 

WATER PLUS

: Add extra water to the wash and rinse cycles for superior results.

• Select a water temperature based on the type of load you are washing. 

• To change the spin speed, press the Spin Speed button repeatedly to cycle through available options.

• To change the soil level, press the Soil Level button repeatedly until the desired setting is on.

• Press repeatedly to adjust the volume of the Beeper

• To set the type of or amount of drying time press DRY button repeatedly.

Option Button

Wash/Rinse, Spin speed, Soil Level, Dry Beeper Button

Summary of Contents for WM3988H*A Series




































































Reviews:

No comments

Brands by name

Popular brands

Load more brands