
44
TROUBLESHOOTING
Problem
Possible Cause
Solutions
Washer will not operate
Lid is open.
•
The washer will not operate if the lid is open.
Close the lid and make sure that nothing is
caught under the lid preventing it from closing
completely.
Circuit breaker/fuse is tripped/
blown.
•
Check house circuit breakers/fuses. Replace
fuses or reset breaker. The washer should be
on a dedicated branch circuit.
Control needs to be reset.
•
Press the
Power
button, then re-select the
desired cycle and press the
Start/Pause
button.
Start/Pause was not pressed after
a cycle was set.
•
Press the Power button then re-select the
desired cycle and press the
Start/Pause
button. The washer will shut off if the
Start/
Pause
button is not pressed within 60
minutes.
Extremely low water pressure.
•
Check another faucet in the house to make
sure that household water pressure is
adequate.
Washer is too cold.
•
If the washer has been exposed to
temperatures below freezing for an extended
period of time, allow it to warm up before
pressing the
Power
button.
•
Otherwise, the display will not come on.
Washer not filling
properly
Filter clogged.
•
Make sure the inlet filters on the fill valves
are not clogged. Refer to the filter cleaning
instructions.
Inlet hoses may be kinked.
•
Check that inlet hoses are not kinked or
clogged.
Energy efficiency.
•
This is an High-Efficiency (HE) washer.
As a result, the water level settings for this
washer may be different than for conventional
washers.
Insufficient water supply.
•
Make sure that both hot and cold water
faucets are turned on all the way.
The washer lid is open.
•
The washer will not operate if the lid is open.
Close the lid and make sure that nothing is
caught under the lid preventing it from closing
completely.
Water level is too low/
No water is visible in the
drum
Energy efficiency
•
This is an High-Efficiency (HE) washer. As a
result, the water level settings for this washer
may be different than on your previous
washer. The water will not normally cover
the clothes. The fill level is optimized for
the wash motion to achieve the best wash
performance.
Summary of Contents for WM3900H A Series
