LG WM3632H Owner'S Manual Download

Page: 17 / 24

HOW TO USE THE WASHER

OPTION

CHILD LOCK

DOOR LOCKED

1 6

• Use this option for loads that need pretreatment.

Adds 16 minutes prewash and drain.

- When using Prewash option, do not use liquid

detergent in the Main Wash Compartment.
Use powdered for the main wash.

1. Prewash

• Lights whenever the door of the washer is locked.

• The door can be unlocked by pressing the

Start/Pause button to stop the washer.

STATUS INDICATOR

• These lights show elapsed time of the cycle the

washer is operating.

EST. TIME REMAINING

• This display shows:

a) the estimated time remaining in the cycle when

operating,

b) the error code when an error has been

detected.

START/PAUSE

• Use this button to start/stop the washer.

POWER

• Use this button to turn the Power On/Off.

BEEP ON /OFF

• The Beep On/Off function can be set by pressing

and holding the Wash/Rinse and Spin/Speed
button simultaneously.

• The Beep On/Off function can be set at any time

and it is automatically canceled when power failure
occur. Also the Beep On/Off function works when
power is off.

• Use this option to prevent unwanted use of the

washer. Press and hold Soil Level and TIME DRY
button for 3 seconds to lock/unlock control.

• When Child lock is set, “ ” blinks and all buttons

are disabled but Power button. You can thereby
lock the washer while it is operating.

• Adds time to the wash and rinse for better stain

removal.

• Automatically provides a rinse.

2. Stain cycle

• The Quick cycle offers a quick

cycle time.

• Suggested uses include freshening newly

purchased clothes, or clothing that has been
packed away.

3. Quick Cycle

• This option provides an additional rinse.

• Use this option to ensure the removal of detergent

or bleach residue from garments.

4. Extra Rinse

• Use this option to rinse and then spin.

5. Rinse+Spin

• Allows the start of any cycle to be delayed for

1~19(12, 9) hours.

• Choose the wash cycle for your load, and then

press the Delay Wash button once for one hour or
press the button again to increase the delay wash
time up to 19(12, 9) hours in one hour increments.

6. Delay Wash

Summary of Contents for WM3632H

























Search results

Summary of Contents for WM3632H

Reviews:

Related manuals for WM3632H

Brands by name

Popular brands

LG WM3632H, Owner'S Manual

Search results

Summary of Contents for WM3632H

Reviews:

Related manuals for WM3632H

Brands by name

Popular brands