LG WM0642H Series, User'S Manual & Installation Instructions

Page: 25 / 72

SPECIAL FUNCTIONS
The option buttons also activate special functions,
including CHILD LOCK, SPINSENSE™ and TUB
CLEAN. Press and hold the option button marked
with the special function for 3 seconds to activate.
H O W TO U S E
TUB CLEAN
A buildup of detergent residue can
occur in the wash tub over time and can
lead to a mildewy or musty smell. The
TUB CLEAN cycle is specially designed
to remove this buildup. Press and hold
the EXTRA RINSE button for 3 seconds to activate
this cycle. Add liquid chlorine bleach to the bleach
compartment. After the cycle has ended, open the
door and allow the drum interior to dry completely.
NOTE: Do NOT use this cycle with clothes,
and do NOT add detergent or fabric softener.
CHILD LOCk
Use this option to prevent unwanted use of the
washer or to keep cycle settings from
being changed while the washer is
operating. Press and hold the DELAY
WASH button for 3 seconds to activate
or deactivate CHILD LOCK.
Once CHILD LOCK is selected, the display will
alternate between CL and the
time remaining, and all controls are disabled. The
washer can be locked during a cycle.
HAND WASH/WOOL
• Only woolen items that are designated as
“Machine-Washable” should be washed in this
washing machine
• Wash only small loads for optimum fabric care
(less than 8 lbs.)
• Only neutral (wool safe) detergents should
be used (Only a small quantity of detergent
is needed due to the small load size and low
volume of water in the cycle.)
• The HANDWASH/WOOL cycle uses a gentle
tumble action and low speed spin for ultimate
fabric care
Certified by NSF
Certificado por NSF
NSF International (formerly the National Sanitation Foundation),
certifies that
SANITARY
cycle reduces 99.9% of bacteria on
laundry, and none of bacteria will carry over onto the next laundry
load.
SPINSENSE™
SPINSENSE™ can be used to
help reduce or eliminate vibrations,
especially on wood floor installations.
To activate SPINSENSE™:
While the washing machine is running in any
cycle, press and hold the RINSE+SPIN button for
3 seconds.
The RINSE+SPIN button light will blink while
the washer is running to show that SPINSENSE™
is active. The SPINSENSE™ function will remain
active for every cycle, even after a power failure.
To cancel SPINSENSE™:
Press and hold the RINSE+SPIN button for 3
seconds to turn off the SPINSENSE™ function.
NOTE: If you use the TUB CLEAN cycle on a
monthly basis, the wash drum will be kept clean.
The wool wash cycle of this machine has been
approved by Woolmark for the washing of machine
washable Woolmark products provided that the
products are washed according to the instructions
on the garment label and those issued by the
manufacturer of this washing machine, M0807.