manualshive.com logo in svg

LG WK2 S6 Series, Owner'S Manual

Share
Download
LG WK2 S6 Series Owner'S Manual Download Page 6

6

SAFETY INSTRUCTIONS

WARNING

WARNING

• To reduce the risk of explosion, fire, death, electric shock, injury or 

scalding to persons when using this product, follow basic 

precautions, including the following:

Technical Safety

•  This appliance is not intended for use by persons (including children) 

with reduced physical, sensory or mental capabilities, or lack of 

experience and knowledge, unless they have been given supervision 

or instruction concerning use of the appliance by a person 

responsible for their safety.

• Children should be supervised to ensure that they do not play with 

the appliance.

• The inlet water pressure must be between 50 kPa and 800 kPa.

WARNING - Risk of Fire

Install the clothes dryer according to the manufacturer’s 

instructions and local codes.

• 

Clothes dryer installation must be performed by a qualified 

installer.

• 

Do not install a clothes dryer with flexible plastic venting 

materials. If flexible metal (foil type) duct is installed, it must 

be of a specific type identified by the appliance manufacturer 

as suitable for use with clothes dryers. Flexible venting 

materials are known to collapse, be easily crushed, and trap 

lint. These conditions will obstruct clothes dryer airflow and 

increase the risk of fire.

• 

To reduce the risk of severe injury or death, follow all 

installation instructions.

Summary of Contents for WK2 S6 Series

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands