1.4 FEATURES
• Designed for cooling only.
• Powerful and quiet cooling.
• Slide-in and slide-out chassis for the simple installation
and service.
• Reversible inlet grille.
1.5 CONTROL LOCATIONS
• VENTILATION
The ventilation lever must be in the CLOSE position in
order to maintain the best cooling conditions.
When a fresh air is necessary in the room, set the
ventilation lever to the OPEN position.
The damper is opened and room air is exhausted.
NOTE: Before using the ventilation feature, make
the lever, as shown. First, pull down part
to horizontal line with part
.
Precaution: The Remote Control unit will not function
properly if strong light strikes the sensor
window of the air conditioner or if there
are obstacles between the Remote
Control unit and the air conditioner.
POWER BUTTON
Operation starts, when this button is pressed and stops
when you press the button again.
OPERATION MODE SELECTION BUTTON
Select Cooling, or Fan or Dehumidification(Dry) mode
with button. (Dry mode is not to all models.)
ON/OFF TIMER BUTTON
Set the time of starting and stopping operation. The
timer is set by 1 hour.
FAN SPEED SELECTOR
Select the fan speed in three steps.
- High [F3]
➔
Low[F1]
➔
Med[F2]
➔
High[F3]... .
ROOM TEMPERATURE SETTING BUTTON
Control the room temperature within a range of 60°F to
86°F by 1°F.
ENERGY SAVER(Available In some models)
The fan stops when the compressor stops cooling.
Approximately every 3 minutes the fan will turn on and
check the room air to determine if cooling is needed.
AUTO SWING
Control the horizontal air direction by air swing system.
• Side air-intake, side cooled-air discharge.
• Built in adjustable THERMISTOR.
• Washable one-touch filter.
• Compact size.
—4—
Part A
Part B
VENT
CLOSE
OPEN
2
3
1
4
5
7
Power
Temp
Fan Speed
Timer
Mode
Energy
Saver
Auto
Swing
1
4
3
6
2
7
5
6
6
AUTO RESTART
In case the power comes on again after a power failure,
the unit runs as previous setting operation.(Available
in some models)
7
7
