LG WFS1918EKD, Owner'S Manual

Page: 17 / 80

17
W
a
s
h
in
g
P
ro
g
ra
m
s
Close the lid Finish Caution & Note
• The pulsator rotates for
8 seconds to detect the
laundry load.
• Then the WATER LEVEL
and the amount of
Detergent to be used
will be shown and water
will be supplied.
• Water will be sup-
plied for 2 minutes
after the start of the
wash to supplement
the water the laundry
has absorbed.
• When the wash
program ends, the
buzzer will ring
for 10 seconds
before the Power
goes off
automatically.
• If water is already in the tub, or
putting wet laundry into the tub
before starting will increase the
WATER LEVEL.
• With lightweight bulky loads,
WATER LEVEL can be set low.
• Changes to Water Temperature
(HOT/COLD) and wash level are
possible during operation.
(refer to page 14)
• When setting the WATER LEVEL
manually, do not set to Medium to
prevent damage to laundry.
• Washing with HOT water may
damage the laundry (Water is set
to cold automatically). Ensure that
the load is under 2kg.
• In order to avoid damage to
laundry,
the spin cycle may appear slow.
This also avoids wrinkles and
clothing may still contain some
water. This is normal.
• When static pressure of water is
more than 2kg/cm 2 , the QUICK
WASH course will be within
19min.
Maximum
Load
Less than
19.0 kg
Less than
2.0 kg
Less than
2.0 kg
Less than
19.0 kg
Less than
19.0 kg
RECOMMENDED LOADS
MFL68019779(영)_레이아웃 1 16. 5. 11. 오전 10:07 페이지 17