background image

S

afety Information

5

Introduction 

Warning

• Keep the area underneath and around your appliances free of combustible

materials such as lint, paper, rags, chemical, etc. 

Operating with such materials around the machine may trigger
explosion or fire.

• Close supervision is necessary if this appliance is used by or near children. 

Do not allow children to play on, with, or inside this or any other appliance.

There is potential danger that children might drown in the tub.

Do not touch the power plug with a wet hand.  

It will cause electric shock

Do not put your hand, foot or anything under the washing machine
while the washing machine is in operation. 

There is a rotating mechanism under the machine, so you could be injured.

• Make sure that drainage is working properly. 

If water is not drained properly, your floor may get flooded.  Flooded floors
may induce electricity leakage, further resulting in electric shock or fire. 

• If, during spinning, opening the lid does not stop the tub within about 15 seconds,

immediately discontinue operating the machine. 

Call for repair. A machine that spins with its door open may cause injuries.

Never reach into washer while it is moving. 
Wait until the machine has completely stopped before opening the lid.

Even slow rotation can cause injury.

Never attempt to operate this appliance if it is damaged, malfunctioning, partially
disassembled, or has missing or broken parts, including a damaged cord or plug.

Operating with a damaged plug may cause electric shock.

Do not use water hotter than 50°C. 

Use of excessively hot water may cause damage to fabrics or cause
leakage of water.

• Use this appliance only for its intended purpose as described in this Owner’s Manual.
• The laundry process can reduce the flame retardancy of fabrics. To avoid such a result,

carefully follow the garment manufacturer’s wash and care instructions.

• To minimize the possibility of electric shock, unplug this appliance from the power

supply or disconnect the washer at the household distribution panel by removing the
fuse or switching off the cirduit breaker before attempting any maintenance or cleaning.

YOUR 
LAUNDRY
AREA

Caution

WHEN USING
THE WASHER

NOTE

: Pressing Power button to turn off does NOT

disconnect the appliance from the power supply.

Summary of Contents for WF-T1250TD








































Reviews: