LG WF-S110V Owner'S Manual Download Page 32

Page: 32 / 48

Using Washer Cycle

Remote Start

Use a smart phone to control your appliance

remotely. You can also monitor your cycle

operation so you know how much time is left in

the cycle.

To Use Remote Start:

Press the

Power

button.

Put the laundry in drum.

Press and hold

Remote Start

button for 3

seconds to enable Remote Start function.

Start a cycle from the LG SmartThinQ

application on your smart phone.

NOTE

•

Once the Remote Start mode is enabled, you

can start a cycle from the LG SmartThinQ

smartphone application. If the cycle is not

started, the machine will wait to start the cycle

until it is turned off remotely from the

application or the Remote Start mode is

disabled.

•

When Remote Start is turned on, the door is

automatically locked.

To Disable Remote Start:

When the Remote Start is activated, press and

hold

Remote Start

button for 3 seconds.

Download Cycle

Download new and special cycles that are not

included in the basic cycles on the appliance.
Appliances that have been successfully

registered can download a variety of specialty

cycles specific to the appliance.
Only one cycle can be stored on the appliance

at a time.
Once cycle download is completed in the

appliance, the product keeps the downloaded

cycle until a new cycle is downloaded.

Open Source Software Notice
Information

To obtain the source code under GPL, LGPL,

MPL, and other open source licenses, that is

contained in this product, please visit http://

opensource.lge.com.
In addition to the source code, all referred

license terms, warranty disclaimers and

code to you on CD-ROM for a charge covering

the cost of performing such distribution (such as

the cost of media, shipping, and handling) upon

email request to [email protected]. This

offer is valid for a period of three years after our

last shipment of this product. This offer is valid

to anyone in receipt of this information.

Smart Diagnosis™ Using a Smart

Phone

•

For appliances with the

logo

Use this function if you need an accurate

diagnosis by an LG Electronics customer

information centre when the appliance

malfunctions or fails.
Smart Diagnosis™ can not be activated unless

the appliance is connected to power. If the

appliance is unable to turn on, then

troubleshooting must be done without using

Smart Diagnosis™.

Summary of Contents for WF-S110V

















































Search results

Summary of Contents for WF-S110V

Reviews:

Related manuals for WF-S110V

Brands by name

Popular brands

LG WF-S110V, Owner'S Manual

Search results

Summary of Contents for WF-S110V

Reviews:

Related manuals for WF-S110V

Brands by name

Popular brands