background image

17

W

ashing Programs

gent

Close the lid

Finish

Caution & Note

5

4

opriate

etergent

y the

L.

s

priate
tergent

y the

.

s

• The pulsator rotates for

8 seconds to detect the
laundry load.

• Then the WATER LEVEL

and the amount of
Detergent to be used
will be shown and
water will be supplied.

• Water will be

supplied for 2
minutes after the
start of the wash to
supplement the
water the laundry
has absorbed.

• When the wash

program ends, the
buzzer will ring
for 10 seconds
before the Power
goes off
automatically.

• If water is already in the tub, or putting

wet laundry into the tub before starting
will increase the WATER LEVEL.

• With lightweight bulky loads, WATER

LEVEL can be set low. 

3

5

6

7

6

5

7

6

4

4

5

7

6

4

• When setting the WATER LEVEL

manually, do not set to Medium to
prevent damage to laundry.

• Washing with HOT water may damage

the laundry (Water is set to cold
automatically). Ensure that the load is
under 2kg.

• In order to avoid  damage to laundry, 

the spin cycle may appear slow.
This also avoids wrinkles and clothing
may still contain some water. This is
normal.

or the

ng

a mild

ed for

l.

5

• When static pressure of water is more

than 2kg/cm

2

, the QUICK WASH course

will be within 19min.

7

6

4

Summary of Contents for WF-HD150FS









































Reviews: