Operating Y
our
Dryer
37
O
perating Your Dryer
5. Close the door.
Before you close the door, make sure fabrics
are well placed inside and that foreign objects,
especially flammable ones, are not caught
around door.
6. Select the drying cycle you want.
You can choose a cycle by turning the program control
knob until the required program reaches to its indicator.
If you only press Start/Pause button without choosing any
cycle, the dryer will proceed with the Cupboard program.
[Please refer to following Cycle Selection table (page 35) for
the detailed information]
7. Press the start button.
You can hear drum rotating sound.
8. After operation is completed, open the
door and remove the laundry.
Careful! the drum inside could be still hot.
(Operation time varies depending on your cycle
selection or options.)
9. Clean the lint filters and
empty water container.
The lint filter should be cleaned after each load.
10. Turn off the dryer.
Press the ‘‘Power’’ button.
Select the
desired
cycle.
Take out
the laundry.
Clean the
door lint
filter.
Be careful not to trap laundry in between the
loading door and rubber seal.
CAUTION
- Be careful of the fact that filter should not be
torn when using a vacuum cleaner. If there
is a little residue buildup on filter, you can
scrub lint screen with the brush to remove.
- If you want to open the door while dryer is
operating, please press the Start/Pause
button first, wait until drum completely stops
and then open the door.
CAUTION
Never stop a tumble dryer before the end of
the drying cycle unless all items are quickly
removed and spread out so that the heat is
dissipated.
WARING
Note
The final part of a tumble dryer cycle occurs
without heat (cool down cycle) to ensure that the
items are left at a temperature that ensures that
the items will not be damaged.
MFL67708678_en
Summary of Contents for WF-D90PW
Page 50: ...50 M emo MFL67708678_en ...
Page 51: ...51 M emo MFL67708678_en ...
Page 52: ...MFL67708678_en ...
