background image

rounding Method

G

31

Care and Maintenance

rrect

Earth wire should be connected.
If the earth wire is not connected, there is possible a danger of electric shock caused by
the current leakage .

Grounding Method with Ground insert space Terminal

Other Grounding Method

If the AC current outlet has a ground terminal, then
separate grounding is not required. Note that AC power
outlet configurations may differ from country to country

Connect the ground Wire to the socket provided
exclusively for Grounding.

If grounding methods described above are not
possible, a separate circuit breaker should be
employed and installed by a qualified electrician

Ground
Terminal

Outlet with ground terminal.

Ground Wire

Ground Copper Plate

Ground 
Wire

Short-circuit
breaker

• To prevent a possible explosion, do not connect ground to a gas pipe
• Do not connect ground to telephone wires or lightning rods. This may be dangerous during electrical

storms

• Connecting ground to plastic has no effect
• Ground wires should be connected when an extension cord is used.

Using Ground Wire

Using a Short Circuit Breaker

Connect the Ground Wire to a Ground Copper
Plate and bury it  more than 75cm in the ground.

Burying Copper Plate

Caution

75cm

Caution

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers
only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's
manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these
conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord
replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular
attention to plugs, wall outlets, and the point where the cord exits the appliance. 

Summary of Contents for WF-D140S









































Reviews: