WF-7979TTP
WF-7979TTP
elti
t
T
10
unction of Each Button
F
sn
oit
cur
ts
nI
gni
tar
ep
O
The
Normal program is used for average
day-to-day washing.
Press the
POWER button to turn power on.
Load clothes.
Press the
START/PAUSE button.
The water level lights will scroll up and down while
the washer is determining the optimum water level
for your load.
Add detergent, bleach, and softener as desired
into the appropriate dispenser.
Close the lid.
Note
* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by 8minutes at maximum and
decreased by 4 minutes at maximum.
* If the Detergent quantity is put more than the standard, for increasing the rinsing performance, it automatically adds rinsing, and the
remaining time may be increased.
* The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to the washing habit of
a specific user. So, it does not matter that the user uses it according to her/his washing habit.
DISPLAY
• Time Left - During operation, the remaining
time is indicated.
• Delay start indication
(Reservation) - When DELAY START
(RESERVATION) program is selected, it
indicates the finishing time. (RES.=DELAY)
• Alarm indication -When an error occurs, an
error message appears to indicate the
abnormality. For example, indicates that
the lid is open.
DELAY START
•
Used to set the time
when wash program
ends from now to
prevent wrinkles
while you are away
for a while.
•
Press the button to
increase the delay
time.
WATER LEVEL SELECTOR
Fully automatic control
• Use to select the proper
amount of water in relation to
the size and type of laundry.
• WATER LEVEL is
automatically selected for
Normal program.
STAIN LEVEL SELECTOR
• This button allows you to select the
strength of the water current.
• Power option selections light up in
sequence as follows [Normal
Strong
Gentle
Normal] as the button is
pushed. This can be selected for any
program, but when washing jeans, it starts
with Strong.
• Adjustment can be made while washing.
PRICESS SELECTOR
WATER TEMP. SELECTOR
•
Used to select the proper
water temperature of washing
water.
•
Press WATER TEMP. to
cycle through the options.
(Both the Hot and Cold
lights are on to indicate
Warm)
• Use to select,Soak,Wask,Rinse,Spin.
• If adjustments are needed during the
wash, press the [START/PAUSE]
button before making any changes.
• When the button is pressed during
washing, the remaining time is
displayed.
noi
tc
ud
ort
nI
11
sn
oit
cu
rt
sn
I
gn
it
ar
ep
O
Other programs are selected as follows:
Press the
POWER
button to turn power on.
Load clothes.
Add detergent, bleach, and softener as desired in the appropriate dispensers.
Select water temperature, water level, program, and wash options as described below.
Close the lid and press the
START/PAUSE
button.
* The sensor for a Detergent quantity is designed to detect based on a synthetic Detergent powder. If you put a liquid one or a natural
one or too much bleaching agent, the detecting ability of the sensor may be decreased.
* Even if the water level or the water temperature are changed by the user in Normal Program,
the sensor will still work. The sensor algorithm may differ according to models.
Manual control
CHILD LOCK
•
Used to lock or unlock the control
buttons to prevent all the setting
from being changed by a child.
•
Push both buttons simultaneously
for locking and push them once
more for unlocking during
washing.
WASHING CONDITION INDICATOR
• It only operates in Normal Program.
• During being detected by the sensor, the LED flashes green, orange
and red in turn. And, after detecting, the LED lights a specific color according to the detecting condition as
follows:
If the current washing condition (detergent quantity, water temperature, water quality, etc.) is determined as
better than the standard one, it optimizes the algorithm to save the energy by decreasing washing time/strength,
and the LED automatically turns to red.
If the current washing condition is determined as worse than the standard one, it optimizes the algorithm by
increasing washing time/strength, and the LED automatically turns to orange.
If the current washing condition is determined as equal to the standard one, the algorithm has no change and the
LED turns to green.
START/ PAUSE BUTTON
•
Use to start or stop the
washing machine
temporarily.
•
After 10 minutes in the
pause state, the power is
automatically turned off.
POWER BUTTON
• Use to turn the power on or off.
• Push again and power goes on or
off
• The power goes off automatically
about 10 seconds after the wash is
finished.
PROGRAM SELECTOR
•
According to laundry and stain, you
can select a suitable program yourself.
•
Press the button to cycle through the
options.
Summary of Contents for WF-5443TPP
Page 1: ......
